Airsoft batteri sikkerhetsguide - Game-On.no

Softgun ·Aug 31, 2025

Airsoft battery safety guide

An airsoft battery should be handled with great care. We have therefore created this guide so that you know how to handle your battery.

Any disruption to the structure of a battery can lead to damage and ignition.
Positive and negative poles should not be connected together as this may cause permanent damage to the battery or lead to ignition.
One The battery should neither be heated nor exposed to low temperatures.
One The battery must never be exposed to liquid.
A battery is susceptible to getting a mechanical damage. The mechanical damage can cause permanent damage and result in it catching fire.
One The battery should be charged according to the instructions provided with the battery. The red colored wire (+) should be connected to the red colored wire (positive port) of the charger. The black colored wire (-) should be connected to the black colored wire (negative port) of the charger.
Each battery cell can be charged to a value of 3.7V. This value should not be exceeded. Other charging settings may cause irreversible damage to the battery.
A battery charge should be carried out under constant supervision (even with high-quality batteries) on the non-flammable surface of non-conductive materials.
One The battery should be charged with a charger that is suitable and compatible with the battery. Using an inappropriate charger may cause permanent damage to the battery.
Charging a battery to a value lower than 3V per cell may cause damage.
If a battery is used incorrectly, it can be permanently damaged or ignite.
Should you come into contact with the electrolyte in a battery, you should immediately rinse the contaminated area with water and contact a doctor immediately.
When one battery charging is complete, the battery should be disconnected from the charger immediately.
If changes are detected in the battery (f.eks. color, swelling, too high temperature), the use of the battery is stopped.
One The battery should be used in such a way that no third parties have access to it.
Care must be taken when installing a battery. Any short circuit can cause the battery to ignite and in extreme situations explode.
A battery that has been mechanically damaged, overcharged, or deeply discharged is considered unusable.
To keep a battery in good condition, it should be balanced during charging (a good charger has a built-in balancer).
It might be good to acquire a charger that has a storage function that will either charge or discharge the battery until it reaches 3.7V per cell.